Beijing Power Equipment Group Co., Ltd.

Tel: +86-010-69372319

E-mail: bpeg02@aliyun.com

Web: www.bpeg.cn

Contact US
Address:

No.12, Haotian Street, Liangxiang, Fangshan District, Beijing-102401, China

TEL: 86-010-69372319

FAX: 86-010-69376904
Website: www.bpegchina.com                              www.bpeg.cn
Home > Knowledge > Content
Packaging, transportation and storage requirements for rolling mills
- Jul 24, 2018 -

    We have introduced a lot of knowledge about the use and operation of rolling mills. However, if you want to ensure the normal use of the mill, for its packaging, transportation and storage are required to comply with certain requirements.

    Below we will introduce the content of this aspect, hope can provide a reference. First, let's take a look at how to properly package the mill. Usually, as the equipment in the transport is taken in the form of bulk shipping, so in the packaging, will require the motor part of its plastic wrap. This can prevent damage caused by damp.

    In addition, all exposed parts of the shaft head also need to use plastic sheeting for bandaging to prevent injury and corrosion. As for the other parts of the mill, it is necessary to apply the antirust oil in advance to avoid the problem of rust in early summer. So, in the course of transportation, what problems should be paid attention to? When loading and unloading the equipment, it shall be carefully operated and the rope used must be assured of sufficient strength. Also pay attention to the lifting of the time, not to damage to the protruding parts of the device.

    It is best to use some soft objects for protection. In the process of transport, it is important to ensure that the mill is fixed, so as not to appear shaking, not to appear strong vibration or impact. In the course of driving, should ensure a uniform speed, smooth driving.

   In addition, when we store the product, we also need to pay attention to some problems. When the mill arrives, we need to take it out of the box in time and check it carefully. The mill equipment is then placed in a ventilated and dry room to prevent rust damage. If you need long-term storage, you should clean up and do a good job of anti-rust treatment.